JUMO dTRANS T02 – Four-Wire Transmitter (707020)
Types 707021 and 707022 are discontinued types, order availability until
September 30, 2019, successor products are the multifunctional four-wire
transmitter of the JUMO dTRANS T06 series (data sheet 707070)
- Design width 17.5 or 22.5 mm
- Mounting on DIN rail, 35 mm
- Universal measurement input
- Galvanic isolation
- Current output, voltage output
- 2 open collector outputs
- LCD display
- Measuring circuit monitoring NAMUR NE 43
- Also available in Ex and IECEx version
- Customer-specific linearization
- Configuration with setup program or keypad (LCD version)
JUMO dTRANS T02 transmitters are equipped with a microprocessor for digital signal processing. The input and the output are galvanically isolated. The device can be mounted on DIN rails. Electrical connection is made using screw terminals for strand or wire (conductor cross section max. 2.5 mm²).
Depending on the type, the output signal 0/4 to 20 mA or 0/2 to 10 V is provided linearized (temperature-linear), or optionally, reversed. The PC setup program, which is available as an accessory, can be used to program the transmitter (probe type, measuring range, output behavior, fine adjustment, customer-specific linearization).
For types 707021/... and 707022/... it is also possible to program the limit value monitoring and the frequency output.
Current and voltage output are provided directly at connection terminals. No work on the hardware is required.
Please take note of our General Terms and Conditions and Clauses for Paragraph 1.4 General Terms and Conditions.
|Article number||Product description||Price of the full version|
Setup program dTRANS T02additional information