More than sensors+automation

Temperature Controllers Overview

As with all JUMO automation components, our temperature controllers have been carefully produced by our in-house development department. Our development process draws on the wide-ranging expertise that our engineers have acquired over many decades. This is reflected in the outstanding technical features of the devices, closely tailored to match specific application areas. All compact controllers and process controllers are equipped with the proven JUMO control algorithms, making it possible to control even higher-order control paths. Integrated math and logic function expand the range of functions of the controllers and enable calculations, links, and evaluations to be performed that could previously only be implemented with the use of external auxiliary devices. High-end devices with a modular structure operate up to eight independent and freely configurable control channels.

JUMO IMAGO F3000 - Process Control for the Meat Processing Industry (700101)
JUMO IMAGO F3000 - Process Control for the Meat Processing Industry (700101) UL / CRUUS China RoHS-e

  • 315 × 171 and 171 × 315 mm formats
  • 5" color graphic display
  • Two-state/three-state continuous controller, three-step controller, continuous controller
  • 4 control channels
  • Inputs/outputs can be expanded in a modular structure
  • 99 programs with real-time clock
  • Math and logic function
  • Recording function
  • Modbus interface, PROFIBUS-DP interface

LR 316 - Laboratory controller in a desk-top case (700703)
LR 316 - Laboratory controller in a desk-top case (700703)

  • Wired ready for use
  • 2-state controller
  • Pt100, Pt1000, Fe-CuNi "L" or NiCr-Ni "K"
  • Load circuit up to 16A
  • Modbus port

JUMO eTRON T – Digital Thermostat (701050)
JUMO eTRON T – Digital Thermostat (701050) UL / CRUUS Metrological certification China RoHS-e

  • Design width 22.5 mm
  • Mounting on DIN rail 35 mm
  • Heating or cooling operation
  • LCD display
  • 10 A relay (changeover contact)
  • Configuration with setup program

JUMO eTRON M - Electronic Microstat (701060)
JUMO eTRON M - Electronic Microstat (701060) UL / CRUUS Metrological certification China RoHS-e

  • 76 × 36 mm format
  • Heating or cooling operation
  • Defrosting function
  • Counters for operating hours and service
  • LCD display
  • Two relays
  • Configuration with setup program

JUMO eTRON M100 - Electronic Cooling Controller (701061)
JUMO eTRON M100 - Electronic Cooling Controller (701061) China RoHS-e

  • 76 × 36 mm format
  • Heating or cooling operation
  • Defrosting process electrically or with hot gas
  • Counters for operating hours and service
  • Real-time clock, Modbus interface, data logger
  • LCD display
  • Configuration with setup program

JUMO iTRON DR 100 - Compact Controller (702060)
JUMO iTRON DR 100 - Compact Controller (702060) UL / CRUUS Metrological certification China RoHS-e

  • Design width 22.5 mm
  • Installation on DIN rail, 35 mm
  • Two-state/three-state controller
  • LCD display  
  • Timer and ramp function

JUMO dTRON 304/308/316 - Compact Controller with Program Function (703041/42/43/44)
JUMO dTRON 304/308/316 - Compact Controller with Program Function (703041/42/43/44) China RoHS-20 UL / CRUUS Metrological certification PROFIBUS DIN

  • 48 × 48 mm, 48 × 96 mm, 96 × 48 mm, 96 × 96 mm formats
  • Two-state/three-state continuous controller, three-step controller, continuous controller
  • Inputs/outputs can be expanded in a modular structure
  • Timer/ramp/program function
  • Math and logic function
  • Modbus and PROFIBUS DP interface
  • Approval DIN EN 14597

JUMO dTRON 304/308/316 - Compact Controller for the Plastics Industry (703046)
JUMO dTRON 304/308/316 - Compact Controller for the Plastics Industry (703046) China RoHS-20 UL / CRUUS

  • 48 × 48 mm, 48 × 96 mm, 96 × 96 mm formats
  • 2-state/3-state continuous controller, three-step continuous controller
  • Inputs/outputs have modular extensibility
  • Special functions for plastics processing machines
  • Math and logic function
  • Interface for Modbus master/slave, current 0/20 mA, PROFIBUS-DP

JUMO IMAGO 500 – Multichannel Process Controller and Program Controller (703590)
JUMO IMAGO 500 – Multichannel Process Controller and Program Controller (703590) China RoHS-20 UL / CRUUS

  • 144 × 130 mm format (installation dimensions 92 × 92 mm)
  • 5" color screen
  • Two-state controller, three-state controller, three-step controller, position controller, continuous controller
  • 8 control channels
  • Inputs and outputs can be expanded in a modular structure
  • 50 programs with real time clock
  • Math and logic functions
  • Recording function
  • Modbus and PROFIBUS DP interface